HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

384 Messages
WEBD-1002
Message
Probable cause
The SSL key file is either invalid or absent.
Recommended action
1. Run the configure command to disable HTTPS. For more information on the configure
command, refer to the HP StorageWorks Fabric OS 4.x command reference guide.
2. Install a valid key file and enable HTTPS again.
Severity
WARNING
WEBD-1003
Message
Probable cause
The HTTP/HTTPS interface is disabled. This is logged when HTTP/HTTPS is disabled through the
configure command.
Recommended action
Run the configure command to enable HTTP/HTTPS. For more information on the configure
command, refer to the HP StorageWorks Fabric OS 4.x command reference guide.
Severity
INFO
WEBD-1004
Message
Probable cause
The HTTP server configuration changed.
timestamp, [WEBD-1002], sequence-number,, WARNING, system-name, Missing or
Invalid Key file -- HTTPS is configured to be enabled but could not be
started.
timestamp, [WEBD-1003], sequence-number,, INFO, system-name, HTTP/HTTPS
interface disabled
timestamp, [WEBD-1004], sequence-number,, INFO, system-name, HTTP server
will be restarted due to configuration change