HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

388 Messages
Recommended action
No action is required.
Severity
INFO
ZONE-1005
Message
Probable cause
A port is zoned with mixed devices (WWN and domain, portarea). During zoning database cross
checking, the system detects that either:
• A port zone member is also listed as a member of a mixed zone
• A WWN zone member is also specified as a member of a mixed zone
Use hard zone enforcement whenever possible. Hard zones are more secure than session-based hard
zones. Both types of zones trap a port login (PLOGI), but hard zones filter out the I/O frames that
session-based hard zones do not.
Recommended action
If hard zone enforcement is preferred, edit the zoning database to have the port zoned with devices
defined as either WWN or defined as domain, portarea, but do not mix the methods used to define
these zone members.
Severity
INFO
ZONE-1006
Message
Probable cause
One or more devices are zoned as WWN devices and also zoned as domain, portarea devices.
The devices are used to specify zone members over separate zones.
Recommended action
If hardware zoning enforcement is preferred, edit the zoning database to have the device zoned using
only one specification type: either WWN or domain, portarea.
timestamp, [ZONE-1005], sequence-number,, INFO, system-name, HARD & SOFT
zones(zone-name, zone-name) definitions overlap.
timestamp, [ZONE-1006], sequence-number,, WARNING, system-name, WARNING -
WWN(WWN-number) in HARD PORT zone zone-name.