HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

Fabric OS 5.0.0 diagnostics and system error messages reference guide 47
2Messages
Authentication error messages
AUTH-1001
Message
Probable cause
The secret database operation has been updated using the secAuthSecret command. The values for
Operation-type are set and remove.
Recommended action
No action is required.
Severity
INFO
AUTH-1002
Message
Probable cause
The specified action failed to update the secret database using the secAuthSecret command. The
values for Operation-type are set and remove.
Recommended action
1. Retry the secAuthSecret command.
2. If the message persists, run supportFtp as needed to set up automatic FTP transfers.
3. Run the supportSave command and contact your switch service provider.
Severity
ERROR
timestamp, [AUTH-1001], sequence-number,, INFO, system-name,
Operation-type has been successfully done.
timestamp, [AUTH-1002], sequence-number,, ERROR, system-name,
Operation-type has failed.