HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

48 Messages
AUTH-1003
Message
Probable cause
An authentication configuration value was set to a specified value. The data type is either
authentication type or DH group type.
Recommended action
No action is required.
Severity
INFO
AUTH-1004
Message
Probable cause
The authUtil command failed to set the authentication configuration value. The data type can be either
authentication type or DH group type.
Recommended action
1. Retry the authUtil command.
2. If the message persists, run supportFtp as needed to set up automatic FTP transfers.
3. Run the supportSave command and contact your switch service provider.
Severity
ERROR
AUTH-1005
Message
Probable cause
Authentication file corruption.
timestamp, [AUTH-1003], sequence-number,, INFO, system-name, data-type
type has been successfully set to setting value.
timestamp, [AUTH-1004], sequence-number,, ERROR, system-name, Failed to
set data type type to setting-value.
timestamp, [AUTH-1005], sequence-number,, ERROR, system-name,
Authentication file does not exist: error-code.