HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

50 Messages
AUTH-1008
Message
Probable cause
The switch does not have a security license.
Recommended action
Verify that the security license is installed using the licenseShow command. If necessary, reinstall the
license using the licenseAdd command.
Severity
ERROR
AUTH-1010
Message
Probable cause
An internal problem with the Secure Fabric OS.
Recommended action
1. Reboot or power cycle the switch.
2. If the message persists, run supportFtp as needed to set up automatic FTP transfers.
3. Run the supportSave command and contact your switch service provider.
Severity
ERROR
AUTH-1011
Message
Probable cause
An internal problem with the Secure Fabric OS.
timestamp, [AUTH-1008], sequence-number,, ERROR, system-name, No security
license, operation failed.
timestamp, [AUTH-1010], sequence-number,, ERROR, system-name, Failed to
initialize security policy: switch switch-number, error error-code.
timestamp, [AUTH-1011], sequence-number,, WARNING, system-name, Failed to
register for failover operation: switch switch-number error error-code