HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

58 Messages
AUTH-1032
Message
Probable cause
The authentication process failed to generate a particular data (that is, challenge, nonce, or response
data) for an authentication payload. This usually relates to internal failure. A nonce is a single-use, usually
random value used in authentication protocols to prevent replay attacks.
Recommended action
This problem is usually transient, although the authentication may fail.
1. Reinitialize authentication using the portDisable and portEnable commands or the
switchDisable and switchEnable commands.
2. If the message persists, run supportFtp as needed to set up automatic FTP transfers.
3. Run the supportSave command and contact your switch service provider.
Severity
ERROR
AUTH-1033
Message
Probable cause
An entity was not configured in the SCC policy and tried to connect to the port.
Recommended action
Add the entity's WWN to the SCC policy and reinitialize authentication by using the portDisable and
portEnable commands or the switchDisable and switchEnable commands.
Severity
ERROR
timestamp, [AUTH-1032], sequence-number,, ERROR, system-name, Failed to
generate data-type for message-payload payload: length data-length, error
code error-code, port port-number
timestamp, [AUTH-1033], sequence-number,, ERROR, system-name, Disable port
port-number due to unauthorized switch switch-WWN-value