HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

Fabric OS 5.0.0 diagnostics and system error messages reference guide 59
AUTH-1034
Message
Probable cause
The entity name in the payload is not in the right format.
Recommended action
1. Reinitialize authentication using the portDisable and portEnable commands or the
switchDisable and switchEnable commands.
2. If the message persists, run supportFtp as needed to set up automatic FTP transfers.
3. Run the supportSave command and contact your switch service provider.
Severity
ERROR
AUTH-1035
Message
Probable cause
A data field in the authentication message has an invalid length field. This error usually indicates internal
failure.
Recommended action
This problem is usually transient, although the authentication may fail.
1. Reinitialize authentication using the portDisable and portEnable commands or the
switchDisable and switchEnable commands.
2. If the message persists, run supportFtp as needed to set up automatic FTP transfers.
3. Run the supportSave command and contact your switch service provider.
Severity
ERROR
timestamp, [AUTH-1034], sequence-number,, ERROR, system-name, Failed to
validate name entity-name in authentication-message: port port-number
timestamp, [AUTH-1035], sequence-number,, ERROR, system-name, Invalid
data-type length in message-phase message: length data-length, port
port-number