HP StorageWorks Fabric OS 5.0.0 Diagnostics and System Error Messages Reference Guide (AA-RW1SA-TE, May 2005)

Fabric OS 5.0.0 diagnostics and system error messages reference guide 99
FABR-1010
Message
Probable cause
Errors occurred while cleaning up the RDI (request domain ID). The error description provides further
details. This message is rare and usually indicates a problem with Fabric OS.
Recommended action
If the message persists, run supportFtp as needed to set up automatic FTP transfers and then run the
supportSave command and contact your switch service provider.
Severity
WARNING
FABR-1011
Message
Probable cause
Fabric OS is unable to inform the Fabric OS State Synchronization Management (FSSME) module that the
fabric is stable or unstable. This message is rare and usually indicates a problem with Fabric OS.
Recommended action
If the message persists, run supportFtp as needed to set up automatic FTP transfers and then run the
supportSave command and contact your switch service provider.
Severity
ERROR
FABR-1012
Message
Probable cause
The fabric is not in the appropriate state for the specified process. This message is rare and usually
indicates a problem with Fabric OS.
timestamp, [FABR-1010], sequence-number,, WARNING, system-name,
error-description
timestamp, [FABR-1011], sequence-number,, ERROR, system-name,
error-description
timestamp, [FABR-1012], sequence-number,, WARNING, system-name,
function-stream: no such type, invalid-type