HP StorageWorks Fabric OS 5.0.0 Fabric Watch User Guide (AA-RW1TA-TE, May 2005)
Table Of Contents
- Contents
- About this guide
- An introduction to Fabric Watch
- Fabric Watch concepts
- Fabric watch components
- Configuring events
- Port persistence
- Notification methods
- Switch policies
- Interpreting event messages
- Activating and accessing Fabric Watch
- Configuring Fabric Watch
- Configuring Fabric Watch thresholds
- Configuring notifications
- Configuring switch status policy
- Configuring FRUs
- Configuring Fabric Watch using Web Tools
- Configuring Fabric Watch using SNMP
- Generating Fabric Watch reports
- Default threshold values
- Basic Fabric Watch configuration guidelines
- Using Fabric Watch with configuration files
- Glossary
- Index
Configuring Fabric Watch60
How to calculate values for alarms
The following sections show how to change the above alarm for the RXPerformance class.
Here, a value of 19 is specified. The value is the sum of the alarm matrix values: in this case
EmailAlert-16, SnmpTrap-2, and Errlog-1 (16+2+1=19).
To calculate the values to specify in your alarms:
1. Add the numbers beside each state (for the states you want to include). The values for the
states are:
•Errlog - 1
•SnmpTrap - 2
• PortLogLock - 4
• RapiTrap - 8
•EmailAlert -16