HP StorageWorks Fabric OS 5.0.0 Fabric Watch User Guide (AA-RW1TA-TE, May 2005)

63Fabric OS 5.0.0 Fabric Watch user guide
Figure shows how to apply the custom value for the threshold alarm changes; unless you
apply the value, it does not take effect.
Figure 11 Applying threshold alarm changes
NOTE: To ensure that your alarm setting configuration is in effect, remember to change the
alarm level to Custom and then apply the alarm settings.
1 : change behavior type 11 : change threshold alarm level
2 : change behavior interval 12 : change changed alarm
3 : change threshold boundary level 13 : change below alarm
4 : change custom unit 14 : change above alarm
5 : change custom time base 15 : change inBetween alarm
6 : change custom low 16 : apply threshold alarm changes
7 : change custom high 17 : cancel threshold alarm changes
8 : change custom buffer 18 : return to previous page
9 : apply threshold boundary changes
10 : cancel threshold boundary changes
Select choice => : (1..18) [18] 16
.
.
.