HP StorageWorks Fabric OS 5.0.0 MIB Reference Guide (AA-RW1QA-TE, May 2005)

106 FE MIB objects
fcFxPortPhysAdminStatus
OID 1.3.6.1.3.42.2.1.2.3.1.3
Description The desired state of the Fx_Port:
• Online (1); place port online.
• Offline (2); take port offline.
• Testing (3); initiate test procedures.
A management station may place the Fx_Port in a desired state by setting this object
accordingly. The testing state (3) indicates that no operational frames can be passed.
When a fabric element initializes, all Fx_Ports start with fcFxPortPhysAdminStatus in the
offline state (2). As the result of either explicit management action or per configuration
information accessible by the fabric element, fcFxPortPhysAdminStatus is then changed to
either the online (1) or testing (3) states or remains in the offline state (2).
fcFxPortPhysOperStatus
OID 1.3.6.1.3.42.2.1.2.3.1.4
Description The current operational status of the Fx_Port:
• Online (1); login may proceed.
• Offline (2); login cannot proceed.
• Testing (3); port is under test.
• Link-failure (4); failure after online/testing.
The testing state (3) indicates that no operational frames can be passed. If
fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2).
If fcFxPortPhysAdminStatus is changed to online (1), then fcFxPortPhysOperStatus should
change to 1 (online) if the Fx_Port is ready to accept fabric login requests from the
attached Nx_Port; it should proceed and remain in the link-failure state (4) if and only if
there is a fault that prevents it from going to the online state (1).
fcFxPortPhysLastChange
OID 1.3.6.1.3.42.2.1.2.3.1.5
Description The value of sysUpTime at the time the Fx_Port entered its current operational status. A
value of 0 indicates that the Fx_Port’s operational status has not changed since the agent
last restarted.
fcFxPortPhysRttov
OID 1.3.6.1.3.42.2.1.2.3.1.6
Description The Receiver_Transmitter_Timeout value of the Fx_Port. This is used by the receiver logic
to detect loss of synchronization.