HP StorageWorks Fabric OS 5.0.0 MIB Reference Guide (AA-RW1QA-TE, May 2005)

164 SW-MIB objects
swAgtTrapRcp
OID 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3
Description This is the trap recipient associated with the community. If a new value is set successfully,
it takes effect immediately.
Note If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP
trap is not sent for the associated community string.
With a setting that is not the 0.0.0.0 IP address, SNMP traps are sent to the host with the
associated community string.
Any or all of the trap recipients can be configured to send a trap for the associated
community string. The maximum number of trap recipients that can be configured is six. If
no trap recipient is configured, no traps are sent.
The trap recipient IP address should be part of the Access Control List for Fabric OS
v2.6.1, v3.1, and v4.x (see the agtCfgSet command).
swAgtTrapSeverityLevel
OID 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4
Description This is the trap severity level associated with swAgtTrapRcp. The trap severity level, is
related to the event’s severity level. When an event occurs, if its severity level is at or
below the set value, the SNMP trap is sent to configure trap recipients. The severity level
is limited to particular events. If a new value is set successfully, it takes effect immediately.
Note This object obsoletes swEventTrapLevel.
Fibre channel port group
This group contains information about the physical state, operational status, performance, and error
statistics of each Fibre Channel port on the switch. A Fibre Channel port is one that supports the Fibre
Channel protocol, such as F_Port, E_Port, U_Port, or FL_Port.
swFCPortCapacity
OID 1.3.6.1.4.1.1588.2.1.1.1.6.1
Description The maximum number of Fibre Channel ports on this switch. It includes U_Port, F_Port,
FL_Port, and any other types of Fibre Channel port.
Note The valid values are:
• 8 for the SAN Switch 2/8 EL and SAN Switch 2/8V
• 16 for the SAN Switch 2/16 and SAN Switch 2/16V
• 32 for the SAN Switch 2/32
• 32 for the SAN Switch 4/32
• 64 for the Core Switch 2/64
• 128 for the SAN Director 2/128