HP StorageWorks Fabric OS 5.0.0 MIB Reference Guide (AA-RW1QA-TE, May 2005)

166 SW-MIB objects
swFCPortPhyState
OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3
Description The physical state of the port. Possible values are:
• noCard (1); no card is present in this switch slot.
• noTransceiver (2); no Transceiver module in this port (Transceiver is the generic
name for GBIC, SFP, and so on).
• laserFault (3); the module is signaling a laser fault (defective GBIC).
• noLight (4); the module is not receiving light.
• noSync (5); the module is receiving light but is out of sync.
• inSync (6); the module is receiving light and is in sync.
• portFault (7); the port is marked faulty (defective GBIC, cable, or device).
• diagFault (8); the port failed diagnostics (defective G_Port or FL_Port card
or motherboard).
• lockRef (9); the port is locking to the reference signal.
swFCPortOpStatus
OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4
Description The operational status of the port. Possible values are:
• unknown (0); the port module is physically absent.
• online (1); user frames can be passed.
• offline (2); no user frames can be passed.
• testing (3); no user frames can be passed.
• faulty (4); the port module is physically faulty.
swFCPortAdmStatus
OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5
Description The desired state of the port. A management station may place the port in a desired state
by setting this object accordingly. Possible values are:
• online (1); user frames can be passed.
• offline (2); no user frames can be passed.
• testing (3); no user frames can be passed.
• faulty (4); no user frames can be passed.
Note For Fabric OS v3.x, the 3 (testing) state indicates that no user frames can be passed. As
the result of either explicit management action or per configuration information
accessible by the switch, swFCPortAdmStatus is then changed to either the 1 (online) or 3
(testing) states or remains in the 2 (offline) state.
For Fabric OS v4.x, the 3 (testing) state is not supported.