HP StorageWorks Fabric OS 5.0.0 MIB Reference Guide (AA-RW1QA-TE, May 2005)

Fabric OS 5.0.0 MIB reference guide 167
swFCPortLinkState
OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6
Description Indicates the link state of the port:
• Enabled (1); the port is allowed to participate in the FC-PH protocol with its attached
port (or ports if it is in an FC-AL loop).
• Disabled (2); the port is not allowed to participate in the FC-PH protocol with its
attached ports.
• Loopback (3); the port may transmit frames through an internal path to verify the
health of the transmitter and receiver path.
Note When the port's link state changes, its operational status (swFCPortOpStatus) is affected.
swFCPortTxType
OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7
Description Indicates the media transmitter type of the port. Possible values are:
• unknown (1); cannot determine the port driver.
• lw (2) long wave laser.
• sw (3); short wave laser.
• ld (4); long wave LED.
• cu (5); copper (electrical).
swFCPortTxWords
OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11
Description The number of Fibre Channel words the port has transmitted.
swFCPortRxWords
OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12
Description The number of Fibre Channel words the port has received.
swFCPortTxFrames
OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13
Description The number of Fibre Channel frames the port has transmitted.
swFCPortRxFrames
OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14
Description The number of Fibre Channel frames the port has received.