HP StorageWorks Fabric OS 5.0.0 MIB Reference Guide (AA-RW1QA-TE, May 2005)

Fabric OS 5.0.0 MIB reference guide 213
connUnitNumSensors
OID 1.3.6.1.3.94.1.6.1.14
Description Number of sensors (between 0 and maximum number of sensors) in the
connUnitSensorTable.
Note See Table 13 on page 156 for specific sensor counts on the various switches.
connUnitStatusChangeTime
OID 1.3.6.1.3.94.1.6.1.15
Description The sysUpTime time stamp (in centiseconds) at which the last status change occurred for
any members of the set; this is the latest time stamp that connUnitStatus or
connUnitPortStatus changed.
Note Not supported.
connUnitConfigurationChangeTime
OID 1.3.6.1.3.94.1.6.1.16
Description The sysUpTime time stamp (in centiseconds) at which the last configuration change
occurred for any members of the set. In other words, this is the latest time stamp of flash
memory update. This represents a union of change information for
connUnitConfigurationChangeTime
Note Not supported.
connUnitNumRevs
OID 1.3.6.1.3.94.1.6.1.17
Description The number of revisions in connUnitRevsTable.
Note Set to 2.
connUnitNumZones
OID 1.3.6.1.3.94.1.6.1.18
Description Number of zones defined in connUnitZoneTable.
Note Not supported.
connUnitModuleId
OID 1.3.6.1.3.94.1.6.1.19
Description This is a unique ID, persistent between boots, that can be used to group a set of
connUnits together into a module. The intended use would be to create a connUnit with
a connUnitType of module to represent a physical or logical group of connectivity units.
Then the value of the group would be set to the value of connUnitId for this container
connUnit.
connUnitModuleId should be 0s if this connUnit is not part of a module.
Note Set to the WWN of the switch.