HP StorageWorks Secure Fabric OS 5.0.0 User Guide (AA-RW1UA-TE, May 2005)

Secure Fabric OS commands and Secure Mode restrictions118
Table 20 lists all the commands available for managing Secure Fabric OS.
Table 20 Secure Fabric OS commands
Command Access
level
Description Secure
Mode
and
Non-
Secure
mode
Switches
to use
authUtil admin Displays current authentication
parameters and lets you set the protocol
used to authenticate switches.
Both Any
pkiCreate admin Re-creates the PKI objects on the switch.
See ”Recreating PKI objects if required”
on page 39.
Nonsec
ure
mode
n.a.
pkiRemove admin Removes the PKI objects from the switch. Nonsec
ure
mode
n.a.
pkiShow All users Displays the status of the PKI objects and
digital certificate on the switch. See
”Verifying installation of the digital
certificates” on page 38.
Both Any
secActiveSize admin Displays the size of the active Secure
Fabric OS database.
Both Any
secAuthSecret admin Displays, sets, and removes secret key
information from the database or deletes
the entire database.
Both Any
secDefineSize admin Displays the size of the defined Secure
Fabric OS database.
Both Any
secFabricShow admin Displays Secure Fabric OS-related fabric
information. See ”Displaying general
Secure Fabric OS information” on
page 90.
Secure
mode
Any