HP StorageWorks Secure Fabric OS 5.0.0 User Guide (AA-RW1UA-TE, May 2005)

119Secure Fabric OS 5.0.0 user guide
secFCSFailover admin Transfers the role of the primary FCS
switch to the next switch in the FCS
policy. See ”Failing over the primary FCS
switch” on page 64.
Secure
mode
Backup
FCS switch
secGlobalShow admin Displays current state information for
Secure Fabric OS, such as version stamp
and status of transaction in progress.
Both Any
secHelp admin Displays a list of Secure Fabric OS
commands. To use, enter the secHelp
command at the CLI prompt.
Both Any
secModeDisable admin Disables secure mode. See ”Disabling
Secure mode” on page 128.
Secure
mode
Primary
FCS switch
secModeEnable admin Enables secure mode. See ”Enabling
Secure mode” on page 57. This
command cannot be entered if secure
mode is already enabled unless all the
FCS switches have failed.
Nonsec
ure
mode
Availabl
e in
secure
mode if
no FCS
switches
are left
Enter from
intended
primary
FCS switch
secModeShow admin Shows current mode of Secure Fabric
OS. See ”Displaying status of Secure
mode” on page 92.
Both Any
secNonFCSPasswd admin Sets non-FCS admin account password.
See ”Modifying the non-FCS switch
admin password” on page 100.
secure
mode
Primary
FCS switch
Table 20 Secure Fabric OS commands (continued)
Command Access
level
Description Secure
Mode
and
Non-
Secure
mode
Switches
to use