HP StorageWorks Secure Fabric OS 5.0.0 User Guide (AA-RW1UA-TE, May 2005)

Secure Fabric OS commands and Secure Mode restrictions120
secPolicyAbort admin Aborts all policy changes since changes
were last saved. See ”Aborting All
uncommitted changes” on page 87.
secure
mode
Primary
FCS switch
secPolicyActivate admin Activates all policy changes since this
command was last issued. All activated
policy changes are stored in the active
policy set. See ”Activating changes to
Secure Fabric OS policies” on page 84.
secure
mode
Primary
FCS switch
secPolicyAdd admin Adds members to a policy. See ”Adding
a member to an existing policy” on
page 85.
secure
mode
Primary
FCS switch
secPolicyCreate admin Creates a policy. See ”Creating Secure
Fabric OS policies other than the FCS
policy” on page 66.
secure
mode
Primary
FCS switch
secPolicyDelete admin Deletes a policy. See ”Deleting a policy”
on page 86.
secure
mode
Primary
FCS switch
secPolicyDump admin Displays the Secure Fabric OS policy
database. See ”Viewing the Secure
Fabric OS policy database” on page 90.
secure
mode
Primary or
backup
FCS switch
secPolicyFCSMove admin Moves an FCS member in the FCS list.
See ”Changing the position of a switch
within the FCS policy” on page 63.
secure
mode
Primary
FCS switch
secPolicyRemove admin Removes members from a policy. See
”Removing a member from a policy” on
page 86.
secure
mode
Primary
FCS switch
Table 20 Secure Fabric OS commands (continued)
Command Access
level
Description Secure
Mode
and
Non-
Secure
mode
Switches
to use