HP StorageWorks Secure Fabric OS 5.0.0 User Guide (AA-RW1UA-TE, May 2005)

121Secure Fabric OS 5.0.0 user guide
secPolicySave admin Saves all policy changes since either
secPolicySave or
secPolicyActivate were last issued.
All policy changes that are saved but not
activated are stored in the defined policy
set. See ”Saving changes to Secure
Fabric OS policies” on page 84.
secure
mode
Primary
FCS switch
secPolicyShow admin Shows members of one or more policies.
See ”Displaying individual Secure Fabric
OS policies” on page 91.
secure
mode
Primary or
backup
FCS only
secStatsReset admin Resets Secure Fabric OS statistics to 0.
See ”Resetting Secure Fabric OS
statistics” on page 96.
Both Any
secStatsShow admin Displays Secure Fabric OS statistics. See
”Displaying Secure Fabric OS statistics”
on page 96.
Both Any
secTempPasswdReset admin Removes temporary passwords. See
”Removing a temporary password from a
switch” on page 102.
Secure
mode
Primary
FCS switch
secTempPasswdSet admin Sets a temporary password for a switch.
See ”Creating a temporary password for
a switch” on page 101.
Secure
mode
Primary
FCS switch
Table 20 Secure Fabric OS commands (continued)
Command Access
level
Description Secure
Mode
and
Non-
Secure
mode
Switches
to use