Acknowledgments HP ColorSmart III, PhotoREt III, and HP ZoomSmart Scaling Technology are trademarks of Hewlett-Packard Company. Microsoft®, MS Windows®, Windows®, and Windows NT® are U.S. registered trademarks of Microsoft Corporation. Macintosh® and Apple® are registered trademarks of Apple Computer, Inc. UNIX® is a registered trademark of the Open Group. Novell® and NetWare® are registered trademarks of Novell Corporation. Pentium® is a registered trademark of Intel Corporation.
contents contents contents i welcome Using this Guide For More Information System Requirements 1-1 1-1 1-2 1-2 getting started Understanding the Printer’s Parts and Functions Understanding the Control Panel Buttons and LED Understanding the LCD Display Setting Up Install the Printer Software from the Starter CD (Recommended) Installing Additional Memory 2-1 2-1 2-2 2-3 2-4 software installation Printer Drivers Features Making Copies of the Printer Software Installing the Printer Software for Local Pr
Minimum Printing Margins LCD messages Information Menu Paper Handling Menu Maintenance Menu Printing Menu Configuration Menu Reset Menu Postscript Menu EIO Menu Resetting the EIO Card Understanding Printer Messages ii 5-5 6-1 6-1 6-2 6-2 6-2 6-3 6-3 6-3 6-3 6-5 6-5 troubleshooting General Troubleshooting Tips Printing a Configuration Page Printing a Diagnostic Page Cleaning the Printheads Aligning the Printheads Printing a Sample Page Paper is Jammed in the Printer Tips for Avoiding Paper Jams Unexpected
Networking Accessories Regulatory Notice Power Cord Statement LEDs Classification Energy Consumption Safety Information Hewlett-Packard Limited Warranty Statement Extent of Limited Warranty Limitations of Warranty Limitations of Liability Local Law media Supported Media postscript printing Postscript Printing Installation Notes Installing the Printer Driver Only Current HP Business Inkjet users Specific Printer Features/Issues 8-5 8-6 8-6 8-6 8-6 8-6 8-7 8-7 8-8 8-8 8-9 9-1 9-1 10-1 10-1 10-1 10-2 10-2 10-
welcome welcome The HP Business Inkjet 2200/2250 provides for quick, professional printing when connected directly to your PC or in a network environment. Its high quality output and vibrant colors on paper up to 8.5" x 14" (216 x 356 mm) will help bring creativity and professionalism to any document you print. Using this Guide This guide includes the following sections: • Getting Started—Shows how to set up your printer.
For More Information Web Site Starter CD Toolbox http://www.hp.com/go/businessinkjet http://www.hp.com/cposupport, or http://www.hp.com. The HP web site has the latest printer software, product information, and support information. Includes printer software, a diskette download utility for the printer software, electronic copies of this User’s Guide and the HP JetDirect Print Server Administrator's Guide, release notes, and ordering information. A taskbar icon appears after you install the software.
getting started getting started Understanding the Printer’s Parts and Functions Note: All purple-colored parts of the printer are movable. 1. Paper guides–Guides the paper into the printer. 2. Tray 1–Holds the standard paper. 3. Output tray–Collects the printed pages. 4. Envelope guide–Slides to fit the width of an envelope. 5. Tray 2–Optional paper tray (standard with the HP Business Inkjet 2250TN). 6. Envelope feed–Holds a single envelope to feed into the printer. 7.
1. 2. 3. 4. Power input–Attach power cord here. EIO Slot–Install an HP JetDirect EIO printer server or the HP PS/PCL5 Kit upgrade card. EIO Slot–Install an HP JetDirect EIO printer server or the HP PS/PCL5 Kit upgrade card. Parallel port–Attach parallel cable here. Note: Do not install two HP JetDirect EIO print server cards. Cards can be installed in either slot. You can install two cards at the same time, but one must be an HP PS/PCL5 Kit upgrade card and the other an HP JetDirect EIO print server card.
Understanding the Control Panel Buttons and LED 8 1. 2. 3. 4. 5. 6. 7. 8. Menu–Cycles through the Control Panel menus. Item–Cycles through the selected menu’s items. Value–Cycles through the selected menu item’s values. LCD Panel–Displays printer messages. Resume–Continues a print job that is waiting and selects values from item menus. Cancel–Cancels the current print job. The time it takes to cancel depends on the size of the print job. Press this button once only to cancel a queued print job.
Setting Up 1 Unpack the printer and remove the packing tape and any shipping foam inside the paper trays. 2 Install Tray 2 (optional). Note: Tray 2 (C3398A/C3398C) is a standard feature of the HP Business Inkjet 2250TN. It can be ordered separately for other HP Business Inkjet 2200/2250 printers. 1. 2. 3. 2-4 Position Tray 2 in the location where you want to place the printer. The printer is designed to rest directly on top of the tray.
3 Connect the power cord.
4 Turn on the printer and install the four ink cartridges. The printheads and the ink cartridges are not installed in the same sequence. Follow the colored arrows to properly install the ink cartridges. Press firmly on the cartridge to ensure proper contact after installation.
5 Install the printheads. The printheads are not installed in the same order as the ink cartridges. Follow the colored arrows to properly install the printheads.
Press firmly on the printhead to ensure proper contact after installation. Press firmly to close the printhead cover.
Wait while the printer initializes the printheads. This may take up to 8 minutes. The LCD panel will ask you to load paper and an alignment page will print. 6 Load paper in Tray 1. print side If you wish to remove Tray 1 to load the paper, first lift up the output tray (do not remove the output tray). Before reinserting Tray 1, make sure the printer is plugged in and powered ON.
Do not load paper above the horizontal mark on the yellow sticker attached to the side of the tray. 3.875" (96 mm) 8.5" (216 mm) 5.75" (146 mm) 14" (356 mm) To print on paper greater than 11" (279 mm) in length, see Printing on Legal Paper in Tray 1. 7 Set 1. 2. 3. 4. 2-10 the LCD language preference. Ensure that the printer is turned OFF. Press and hold the Value button and turn ON the printer. Press the Value button to scroll through the language list.
8 Connect the parallel cable or network cable. Note: To connect the printer to a network, plug the network cable into the network port on the HP JetDirect print server. For an overview of printing in a network environment, see page 4-1.
Installing Additional Memory If your printer has the HP PS/PCL5 Kit upgrade installed, you may install up to 64 MB of additional memory which is available for purchase as an accessory (part number F1457B). Note: The HP PS/PCL5 Kit upgrade comes with the HP Business Inkjet 2250 printer. It can also be purchased as an accessory (part number C5935A/C5935C). The module can be installed in the EIO slot on either side of the printer. 1. 2. 3. 4. 5. 6.
software software installation Printer Drivers Features HPA PCL 5C PS ColorSmart Concept Preview Emulate LaserJet Margins Handout (N-up printing) Pages per Sheet Image Enhancement Manual Duplex Optimized for Fax Print in Grayscale Print Preview Quick Sets Symmetrical Margins Tiling Watermark ZoomSmart Scaling Making Copies of the Printer Softwar
following table shows which components are installed for each installation type. Component Description HP Business Inkjet 2200/2250 Printer Driver Installs the printer driver for your printer. HP Business Inkjet 2200/2250 Toolbox Installs the Toolbox. The Toolbox provides additional printer controls, status windows, and troubleshooting information. Program Group Printer Matching Fonts 2200 2250 HPA Custom PCL5 PS Adds an HP Business Inkjet program group to the start menu.
• !!"# • !!## ) *&"+ ",%&"+ "&- $ % &'" ( . / $ $ ) ! .
7. Select Client Setup if the printer is connected to a server or someone's machine. Select Server or Peer-to-Peer Setup if you are setting up a print server for the first time, or if you will print directly to HP JetDirect EIO print server installed in your printer. If you are not sure how to connect your network printer, ask your network administrator, or see the next section, Network Printing for more information.
7. Change the PPD to HP Business Inkjet 2250. 8. Change the AppleTalk Printer by selecting the AppleTalk Zone and then selecting your printer (refer to the configuration page you printed). 9. Click Create and the printer icon appears on your desktop. Setting Up Your Printer in a Unix Environment To print in Unix, you must have an: • HP Business Inkjet 2250 printer, or • HP Business Inkjet 2200 printer with the HP Postscript/PCL5 Kit upgrade.
networking network printing The HP Business Inkjet 2200/2250 can be shared on a network. It can be connected directly to a network using an HP JetDirect print server or attached to a computer that is connected to a network. Network Basics Networks consist of computers connected together to share information and resources, such as printers. On a "client-server" network, client computers send print jobs to dedicated server computers that control the use of each printer.
Supported Network Configurations for Client-Server Printing Server Client Configurations Windows NT 4.0/2000 Windows 95/98 Windows for Workgroups 3.11 Windows NT 4.0/2000 Windows 95/98 Not recommended Novell NetWare 4.11 (Bindery and NDS) Novell NetWare 5.0 (Bindery, NDS, NDPS) Peer-to-Peer Configuration Peer-to-peer printing is more suitable for smaller networks. With peer-topeer printing, you configure your Windows 95, Windows 98, or Windows NT 4.
Installing the HP JetDirect Internal Print Server Card Note: The HP Business Inkjet 2250TN comes with an internal EIO JetDirect print server card preinstalled. It is recommended that the printer be shared on a network through the print server. If you own the HP Business Inkjet 2250TN, skip this section. If you own an HP Business Inkjet 2200/2250 printer other than the HP Business Inkjet 2250TN, you can purchase an internal JetDirect print server for it.
3. Press the Item button repeatedly until PRINT CONFIGURATION PAGE appears. 4. Press the Resume button to print the configuration page. Note: Because you have installed an HP JetDirect card, two configuration pages will print. The JetDirect Configuration Page contains setup information (for example, LAN HW ADDRESS) that may be needed for the next step. Step 3 – Install the Printer Software 1. Install the PCL5 and PS printer driver from the Starter CD.
Clients can connect to the printer in three different ways: • Install the printer software from the Starter CD and connect as a client using the network installation. • Browse to the printer on the network and drag the printer to your Printers folder. The printer software is not installed on your computer; the shared computer controls the printer driver software. • Add the printer and install the software from the INF file located on your network. Ask your network administrator where the INF is located.
Network Support Materials If you encounter any problems or difficulty printing over a network, see the following documentation: Document Document Contents HP JetDirect Print Server Administrator's Guide Included on the Starter CD. It provides detailed information on setting up and using your HP JetDirect EIO Print Server.
paper paper handling Selecting and Loading Paper The printer prints on plain paper and most other types of paper. Most plain paper used for photocopying yields good results. • Always use paper that conforms to the printer specifications. For a list of supported media, see page 9-1. • Do not use media that is damaged, curled, or wrinkled. Do not use paper with cutouts or perforations or paper that is heavily textured or embossed. • Do not use multiple-part forms.
Printing on Legal Paper in Tray 1 or Tray 2 5-2 1. Lift up the output tray. 2. To print on paper from 11" (279 mm) in length up to 14" (356 mm) unlatch the front of the tray and open it. 3. Insert the paper and adjust the paper width and length guides to fit snug against the stack. 4. Lower the output tray and pull out the legal paper extension. 5. Select the appropriate media in the printer driver or your application.
Printing Envelopes or Cards through the Envelope Feed Note: Use the envelope feed to print a single envelope or card. If you need to print more than one, you can use Tray 1. If you have two trays, remember to select Tray 1 in the printer driver. 1. In the print settings dialog box, click Setup and select Manual feed in the Paper Source box. Change other print settings, if necessary, and click OK. 2.
Printing Paper in Tray 2 (Optional Tray) Tray 2 is an optional paper tray designed to print only on plain paper. print side 1. Open Tray 2 by grasping the handle under the front of the tray and pulling the tray toward you. (The tray can be completely removed.) 2. Slide the paper width and length adjusters to their outermost positions and insert up to 250 sheets of paper or up to a 0.98" (25 mm) (whichever is lower) stack of paper into the tray.
Manual Duplexing This feature is only available in the HPA printer driver. Follow the steps below, only if you have previously deselected this option. To print on both sides of the paper: 1. Place the media in the selected tray. 2. From the Effects tab, click Manual Duplex. 3. Click OK and print the document. The printer will notify you when to reinsert the printed pages (printed side up) into the tray.
LCD LCD messages The most convenient way to change settings on the printer is from your computer through the printer driver. You can also change the printer settings from the printer’s Control Panel. The following tables list the menu items and possible values for the printer. Additional menu items can appear in the Control Panel, depending on the hardware modules installed in the printer. To print a complete menu map from the Control Panel: 1. Press the Menu button until INFORMATION MENU appears. 2.
Paper Handling Menu Message Value Description LOCK TRAY = (See page 5-4) NONE 1 2 Locks a paper tray. The LOCK TRAY option is only available if Tray 2 is installed. Default = None. Maintenance Menu Message Value Description CALIBRATE COLOR N.A. Calibrate printer's color intensity against the black intensity by selecting the closest matching calibration pair. CLEAN PRINTHEADS N.A. Initiates the printhead cleaning process. ALIGN PRINTHEADS N.A. Initiates the alignment process.
Configuration Menu Message Value Description PERSONALITY AUTO Sets the personality used to process the job. The PCL5 and PS option is only available if the personality card is inserted. Default = Auto. PCL5 ONLY PS ONLY CLEARABLE WARNINGS INK LOW WARNINGS AUTO ON When ON is selected, clearable warnings are displayed until RESUME is pressed. JOB When JOB is selected, clearable warnings are displayed until end of job. Default = Auto. ON When ON is selected, ink low condition is displayed.
Message Value Description IPX/SPX ON DLC/LLC OFF Selects whether or not a protocol is enabled or disabled. Change it to OFF to disable a protocol. TCP/IP ETALK CFG IPX/SPX NO YES Selects whether you want to access the IPX/SPX menu and set the IPX/SPX protocol parameters. In the IPX/SPX menu, you can specify the Frame Type parameter used on your network. • The default is AUTO, which automatically sets and limits the Frame type to the one detected.
Message Value Description CFG ETALK NO Selects whether you want to access the EtherTalk menu and set the AppleTalk phase parameter (ETALK PHASE=1 or 2) for your network. YES Resetting the EIO Card To restore the factory default values to HP JetDirect EIO print server card: 1. Turn off the printer. 2. While holding down the Item and Resume buttons on the printer's control panel, turn on the printer. All previously stored EIO settings will be lost.
6-6 Message Explanation Solution REPLACE [COLOR] PRINTHEAD The printer detects a faulty ink printhead. Reinstall the faulty ink printhead and try to print. Make sure the shipping tape has been removed. If the error persists, remove the printhead and use a dry, lintfree, soft cloth to gently clean any ink off the contact pads. Reinstall the printhead and try to print. If the error persists, replace the printhead.
troubleshooting troubleshooting General Troubleshooting Tips 1. Check the printer LCD panel. If the printer LCD panel displays a recoverable error message, see Understanding Printer Messages on page 6-5 for instructions on how to resolve the problem. Example Solution BAD INK CARTRIDGE OR PRINTHEAD, CLOSE ALL COVERS, etc. See Understanding Printer Messages on page 6-5 for information on how to resolve such errors. E: XXXX Your printer may have a hardware problem.
The Configuration page will looks similar to one of the following pages. If the PS/PCL5 upgrade Kit is installed (included with the 2250), the Configuration Page looks like the page on the right: 1 2 3 4 The Configuration page is divided into the following sections: Item Description 1 Printer Information shows general printer information such as Firmware version number, Model and Service ID. 2 Personality card Information such as version number and memory installed.
The Diagnostic Page looks similar to this: 1 2 3 The Diagnostic page is divided into the following sections: Item Description 1 Printer Information. Shows general printer information such as Firmware version number, Model and Service ID. 2 Printhead Information. Shows technical information on the printhead performance. 3 Technical Information. Displays detailed technical information on the printheads and ink cartridges.
Aligning the Printheads The printheads are automatically aligned upon installation. If your printouts look like the printheads are misaligned, you can align them through the control panel. 1. Press the Menu button until MAINTENANCE MENU appears. 2. Press the Item button until ALIGN PRINTHEADS appears. 3. Press the Resume button. 4. The printer prints a page with alignment patterns. Printing a Sample Page Print a sample page without being connected to a computer.
3. If the Printhead Cradle is blocking the paper path, gently push it to the side. 4. Free any wrinkled paper and pull the sheet of paper towards you through the front of the printer. Note: Do not remove jammed paper through the Top Cover. If you cannot access the jammed paper, proceed to Step 6. 5. If bulk of the paper is jammed in Tray 1 or Tray 2: a Lift the Output Tray and check for paper jam. b If the paper is jammed in Tray 1, pull out Tray 1. If not, check Tray 2 for paper jam.
d Pull the paper towards you as shown in the diagram. e Close the Top Cover and press the Resume button on the printer to continue. f Replace the tray. g If this does not work, turn off the printer and then turn on again. 6. If you cannot locate the jammed paper in any of the trays: a Turn off the printer and remove the power cord. b Lift the printer off Tray 2. c Remove the jammed paper from the bottom of the printer or from Tray 2. d Replace the printer on top of the paper tray.
• Do not overload the paper trays. Both paper trays hold up to 250 sheets of plain paper or other print material measuring 0.98" (25 mm) in thickness (whichever is less). • Load paper properly. • Do not use paper that is curled or crumpled. • Always use paper that conforms with those listed in the Printer Specifications section. • Always stack paper neatly when printing on both sides of the page (manual duplex).
3. Press the Resume button to print the demo page. • Check the printer setup Make sure your HP Business Inkjet printer is selected as the current or default printer and that Pause Printing is not checked. • Check the network setup Make sure that your printer is properly setup in the network environment. A Blank Page is Printed • Check the printheads for tape Make sure you have removed the printhead shipping tape that covers the ink nozzles.
Something on the Page is Missing or Incorrect • The margin settings may be wrong Make sure the margin settings for the document do not exceed the printable area of your printer. • Color print settings may be wrong Grayscale is probably selected in the HP print settings dialog box. • The wrong printer may be selected Make sure the correct printer is selected as the current or default printer. • The Symmetrical Margins option makes the left and right margins equal and top and bottom margins equal.
• Set the port monitor Use the port software that comes with HP Web JetAdmin, instead of Microsoft LPR port software. Also, for optimal printing and spooling of 8.5" x 14" (216 x 356 mm) size jobs, the TCP/IP Idle time out value of the EIO card should be set to at least 360 seconds. To enable this option: 1. Click Start and select Settings, followed by Printers. 2. Right-click the printer icon and select Modify. 3. Click Next. 4. Set the TCP/IP Idle time out to at least 360. 5. Click Next and then Finish.
Document Document Contents HP JetDirect hardware manual Included with the purchase of an HP JetDirect print server. It describes setup and configuration of your HP JetDirect print server. Note that the HP JetDirect hardware manual does not come with the printer. The NOS (network operating system) documentation These manuals came with your computer or your NOS. They describe basic network printing common to all network printers.
will be charged to your Visa or MasterCard) Monday through Friday 6 am to 6 pm (MST) Canada: Toll free 877 621 4722 (Visa, MasterCard, or American Express) Monday through Friday 8 am to 8 pm (EST) 7-12
For customers outside of North America: Africa/Middle East +41 22/780 71 11 Argentina 541 781 4061/69 Australia 613 8877 8000 Austria 0660 6386 Belgium (Dutch) 02 6268806 (French) 02 6268807 Brazil 55 11 709 1444 Canada 905 206 4663 Chile 800 360999 China 010 6564 5959 Czech Republic 42 (2) 471 7327 Denmark 3929 4099 Finland 0203 47 288 France 01 43 62 34 34 Germany 0180 52 58 143 Greece 01 68 96 4 11 Hong Kong 800 96 7729 Hungary 36 (1) 252 4505 India 9111 682 6035 Indonesia 21 350 3408 I
specifications Printer Specifications Print Method Plain paper drop on-demand thermal inkjet printing Print Speed: (Letter/A4) Fast Normal Best Black text 15 ppm 11 ppm 6.5 ppm Mixed text with color graphics 14 ppm 7.5 ppm 1.5 ppm Full page color 6.0 ppm 2.5 ppm 0.5 ppm Glossy color photo 4" x 6" (101 x 152 mm) N/A 1.0 ppm 0.5 ppm Approximate figures. Exact speed dependent on the system configuration, software program, and document complexity.
Media Size/Type Media Handling Transparencies U.S. Letter 8.5" x 11" (216 x 279 mm), European A4 210 x 297 mm Envelopes (Tray 1 and Envelope Feed only) U.S. No. 10 4.12" x 9.5" (105 x 241 mm), Monarch 3.87" x 7.5" (98 x 191 mm), European DL 200 x 110 mm, A2 Baronial 111.
Dimensions 20.2" (513 mm) W x 8.2" (208 mm) H x 20.4" (517 mm) D without Tray 2 installed. Weight 10 kg (22 lb.
Ordering Information Number Description C2688A HP Business Inkjet 2200 C2689A HP Business Inkjet 2200se C2690A HP Business Inkjet 2200xi C2691A HP Business Inkjet 2250 C2699A HP Business Inkjet 2250TN HP Supplies and Accessories You can order HP supplies and accessories from HP World Wide Web. Visit HP Outlet Center (http://www.hpshopping.com) for more information. HP Premium Transparency Film US Letter, 50 sheets: 8.5" x 11" (216 x 279 mm) C3834A US Letter, 20 sheets: 8.
HP Photo Paper US Letter, 20 sheets: 8.5" x 11" (216 x 279 mm) C1846A A4 (European), 20 sheets: 210 x 297 mm C1847A HP Professional Brochure and Flyer Paper Glossy, US Letter, 50 sheets: 8.5" x 11" (216 x 279 mm) C6817A Glossy, A4, 50 sheets: 210 x 297 mm C6818A Matte, US Letter, 50 sheets: 8.5" x 11" (216 x 279 mm) C6955A Ink Cartridges HP No. 10 Black C4840A (26.5 ml) / C4844A (69 ml) HP No. 11 Cyan C4836A (28 ml) HP No. 11 Magenta C4837A (28 ml) HP No. 11 Yellow C4838A (28 ml) HP No.
HP JetDirect 500X External Print Servers Token Ring 802.5, DB9, RJ-45 J3264A Fast Ethernet/802.3, BNC (10Base2), RJ-45 (10/100Base-TX) J3265A HP JetDirect 300X External Print Servers Ethernet/802.3 RJ-45 (10/100Base-TX) J3263A Visit http://www.hp.com/go/networkprinting for more information. Regulatory Notice Power Cord Statement The power cord cannot be repaired. If it is defective, it should be discarded or returned to the supplier.
1. Read and understand all instructions in the User’s Guide. 2. Observe all warnings and instructions marked on the product. 3. Unplug this product from wall outlets before cleaning. 4. Do not install or use this product near water, or when you are wet. 5. Install the product securely on a stable surface. 6. Install the product in a protected location where no one can step on or trip over the line cord, and the line cord cannot be damaged. 7.
4. For HP printer products, the use of a non-HP ink cartridge or a refilled ink cartridge does not affect either the warranty to the customer or any HP support contract with the customer. However, if printer failure or damage is attributable to the use of a non-HP or refilled ink cartridge, HP will charge its standard time and materials charges to service the printer for the particular failure or damage. 5.
BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY AND WHETHER ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Local Law 1. This Warranty Statement gives the customer specific legal rights. The customer may also have other rights which vary from state to state in the United States, from province to province in Canada, and from country to country elsewhere in the world. 2.
media media Supported Media HP Media Plain Paper HP Premium Inkjet Paper HP Premium Inkjet Heavyweight Paper HP Premium Transparency HP Premium Photo Paper HP Photo Paper HP Professional Brochure Tray 1 Tray 2 Paper Size Tray 1 Tray 2 U.S. Letter 8.5" x 11" (216 x 279 mm) U.S. Legal 8.5" x 14" (216 x 356 mm) U.S. Executive 7.25" x 10.5" (184 x 266 mm) A4 210 x 297 mm A5 148 x 210 mm B5 182 x 257 mm Envelope no. 10 4.12" x 9.
postscript postscript printing Postscript Printing Operating System Version Number Windows 3.1x Microsoft PScript Driver Version 3.58 and HP Business Inkjet 2200/2250 PPD Windows 9x Microsoft PScript Driver Version 4.00 and HP Business Inkjet 2200/2250 PPD Windows NT 4.0 Microsoft PScript Driver Version 4.
If you are using the printer driver that is provided for the printer, the Printer Test Page will include the following information (shown with sample data). Printer Name: Printer Model: HP Business Inkjet 2200/2250 Driver Name: PSCRIPT.DRV Driver Version: 4.00 Installing the Printer Driver Only If you obtained only a printer driver and its associated files (for example, through HP's web page), install them using the following steps. 1.
The following table shows which features are available for each Windows OS. Windows 3.1x Windows 9x Windows NT 4.0 Windows 2000 Paper Type Print Quality Print in Grayscale ColorSmart CMYK Inks Manual Color Options Handout (N-up printing) Watermark Paper Type (Windows 9x) or Media Type (Windows NT 4.0) Operating System Location in Printer Driver Windows 3.
Print Color as Gray Operating System Location in Printer Driver Windows 3.1x Device Options, Color check box Windows 9x Device Options tab, printer features Windows NT 4.0 Advanced tab, Printer Features Windows 2000 Advanced tab, Printing Defaults, Advanced, Printer Features Options: On and Off To activate grayscale printing, change the Print Color as Gray setting to on. This overrides your color settings and prints your documents in black and white (monochrome, grayscale).
Click the Restore Defaults button at any time to return HP ColorSmart to its default setting of Automatic color selection. CMYK Inks Operating System Location in Printer Driver Windows 3.1x Device Options tab, printer features Windows 9x Device Options tab, printer features Windows NT 4.0 Advanced tab, Printer Features Windows 2000 Advanced tab, Printing Defaults, Advanced, Printer Features Options: FAST, EURO, SWOP, TOYO CMYK Inks is the type of color treatment used during printing.
monitor you use and the room's lighting can affect the appearance of colors on your screen. Text In some applications, colored, filled, or rotated text is treated as a graphic or as a photo. Graphics Graphics include items such as bar graphs, pie charts, or tables. Image Images (photos) can be in the form of raster images, bitmaps, and device-independent bitmaps (DIBs). Some examples of photos are pictures from a CD-ROM, pictures taken by a digital camera, and images that were scanned by a desktop scanner.
placed diagonally across the first page or all pages of a document. You can also specify the font, size, angle, and style of the watermark. Watermark Options: None, Company Confidential, Company Proprietary, Company Private, Confidential, Copy, Copyright, Draft, File Copy, Final, For Internal Use Only, Preliminary, Proof, Review Copy, Sample, Top Secret, Urgent. The options listed are the available words that can be printed as a watermark. To turn watermark printing off, click None.
index index aligning printheads, 7-4 avoiding paper jams, 7-6 blank page prints, 7-8 cancel button, 2-3 carriage latch, 2-1 changing printer settings, 6-1 cleaning printheads, 7-3 configuration, 7-1 control panel menus, 6-1 customer support, 7-10 diagnostic, 7-2 EIO slot, 2-2 envelope feed, 2-1 envelope guide, 2-1 graphics are wrong, 7-8 HP JetAdmin, 7-10 HP JetDirect print server card, 4-3 HP supplies, 8-4 ink cartridge door, 2-1 installing optional paper tray, 2-4 item button, 2-3 jammed paper, 7-4 langu
troubleshooting, 7-1 Unix information, 3-5 using the tray lock, 5-4 using this guide, 1-1 value button, 2-3 web site, 1-2, 7-11
DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45001 Manufacturer’s Name: Hewlett-Packard Singapore (Pte) Ltd Manufacturer’s Address: InkJet and Imaging Solutions–Asia Operation 20 Gul Way, Singapore 629196 declares that the product Product Name: HP Business Inkjet 2200/2250 Model Number: C2688A, C2689A, C2690A, C2691A, C2699A Product Options: All conforms to the following product specifications: Safety: IEC 60950: 1991 + A1 + A2 + A3 + A4 / EN 60950: 1992 + A1 + A2 + A3 + A4 IEC
Copyright 2000 Hewlett-Packard Company http://www.hp.