AHCI and RAID on HP Elite 8100 Business PCs

RAID migrations

Migration to RAID 1 from two non-RAID hard drives using Intel Rapid Stor-

age Console

NOTE: HP Elite 8100 Business PC products only support RAID based on two identical SATA hard drives in

either RAID 0 or RAID 1 or Matrix RAID Mode of RAID 0 and RAID 1.

NOTE: At least 6 MB of free space at the end of the drive is required to migrate from a non-RAID to RAID

configuration or an error will occur.

1. Open the Intel Rapid Storage Console and select Create in the top pane and select the Volume

Type in the right pane. Select Real-time data protection (RAID 1).

2. Click Next to configure the volume.

3. In the Configure window, name the volume, select the two disks and specify if you want to keep data

from one of the selected disks.

4. Click Next to begin the confirmation process and start the Create Volume action.