AHCI and RAID on HP Elite 8100 Business PCs

Installation

HP desktops come with RAID software preinstalled; however, if reinstallation is necessary, use setup in

combination with the following supported flags (Version 9.5/9.6):

-?: The installer presents a dialog showing all the supported setup flags (shown here) and their usage.

-ver: Displays the driver version.

-a: Extracts all files (does not install driver) to <path> if -P is also supplied. Otherwise, the files are

extracted to the default location.

-b: Forces a system reboot after installation.

-report <path>: Changes the default log path

-g<LCID>: Specifies the language of the setup dialogs

-nodrv: Installs all components except driver.

-noIRSTgui: Does not install the user interface

-noservice: Does not install the event monitor service

-notray: Does not install the tray icon

-overwrite: Ignores the overwrite warning

-p<path>: Supplies target path when using -A flag.

-noicc: Does not install the Intel Control Center

-s: Does not display any setup dialogs

Notes: Flags and their parameters are not case-sensitive. Flags may be supplied in any order, with the

exception of -S and -G, which must be supplied last. When using the -A flag, a target path may be speci-

fied using the -P flag, and the -G and -S flags are ignored. When using the -O and -G, flags there should

be no space between the flag and the argument.