Hardware Reference Guide - HP Compaq 8100 Elite Convertible Minitower Business PC and HP Z200 Convertible Minitower Workstation

5. Use the Smart Cover FailSafe Key to remove the two tamper-proof screws that secure the Smart
Cover Lock to the chassis.
NOTE: Your computer may look different than the illustration shown below.
Figure 1 Removing the Smart Cover Lock Screws
You can now remove the access panel. See Removing the Computer Access Panel on page 4.
To reattach the Smart Cover Lock, secure the lock in place with the tamper-proof screws.
ENWW Unlocking the Smart Cover Lock 3