Manualshelf

- Hewlett-Packard Desktop PC Owner's Guide

ManualsBrandsHP ManualsDesktopC100/110
161162163164165166167168169170
151
Changing Your Workstation’s Hardware Configuration
Installing an EISA or GSC Option Board
7 Slide the board into the slot. Make sure that the hole in the board’s handle aligns
with the pin on the back panel, as shown in Figure 43.
Figure 43 Installing an Option Board
8 Press in firmly on both ends of the option board at the same time to make sure
that it is firmly seated in the backplane connector.