HP Point of Sale (POS) Peripherals Configuration Guide

Page 456 of 522
7.3 HP ap5000 Touch Screen
7.3.1 Connection
The touch screen on the HP ap5000 system is integrated into the system which is connected
internally via PS/2 interface. There is no user connection required for this device.
7.3.2 Windows Drivers for the Touch Screen
The HP ap5000 touch screen drivers are already installed in the HP factory image (C:\xxxxx\ap5000
Touch Drivers) and are also available from HP.COM.
Note: Under Microsoft Vista, the touch screen install process must be run with ADMINISTRATOR
privileges.
The following is an overview of the steps to install the touch screen drivers and applets:
1. Start the touch screen installer from the location that was mentioned in the beginning of this
section.
Note: On the ap5000 unit with a Microsoft Windows image, the drivers for the ap5000 touch
screen are pre-installed in the image.
2. Follow the prompts that appear on the screen.
3. After the drivers are installed, please select the option to calibrate the touch screen monitor
and follow the instructions on the screen.
Detailed installation instructions
1. Start the touch screen installer from the location that was mentioned in the beginning of this
section.
Note: On the ap5000 unit with a Microsoft Windows image, the drivers for the ap5000 touch
screen are pre-installed in the image.
One must have ADMINISTRATOR privileges in order to install the drivers.
2. Follow the prompts that appear on the screen.