Installation Instructions

HP Retail Integrated

Barcode Scanner

information contained herein is subject to change without notice.

Printed in

739148-001

NO TE: Refer to the HP L6015tm and L6017tm Retail Touch

Monitors User Guide, the HP RP7 Retail System Model 7800

Hardware Reference Guide, or the HP RP7 Retail System Model

7100 Hardware Reference Guide at www.hp.com

for detailed

instructions on installing USB modules.

CAUTION: This accessory is for use only with compatible UL

Listed host products that have been evaluated for the operating

altitude up to 3048m/10,000 feet. Use only with Listed ITE.

Installing Drivers for the Scanner

Download the latest drivers for the scanner from www.hp.com.

Configuring the Scanner for the HP L6015tm

and L6017tm Retail Touch Monitors

To configure the scanner, insert the disc included with this product and

refer to the HP Point of Sale Configuration Guide (available in English

only).

Configuring the Scanner for the HP RP7

Retail System Models 7800 and 7100

To configure the scanner, refer to the HP Point of Sale Configuration

Guide (available in English only). The guide is available on the HP

factory image of the RP7 system's hard drive and at www.hp.com

. To

access the guide on the factory image:

• In Windows Embedded POSReady 2009, select Start > All

Programs > HP Point of Sale Information.

• In Windows 7 or Windows Embedded POSReady 7, select Start

> HP Point of Sale Information.

HP L6015tm and L6017tm Retail Touch Monitors

HP RP7 Retail System Model 7800

RP7 7800

RP7 7100

L6015tm

L6017tm

PAGE 1
HP Retail Integrated Barcode Scanner Installation Instructions L6015tm L6017tm HP L6015tm and L6017tm Retail Touch Monitors RP7 7800 RP7 7100 Copyright © 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Printed in 739148-001 NOTE: Refer to the HP L6015tm and L6017tm Retail Touch Monitors User Guide, the HP RP7 Retail System Model 7800 Hardware Reference Guide, or the HP RP7 Retail System Model 7100 Hardware Reference Guide at www.hp.
PAGE 2
HP RP7 Retail System Model 7100 NOTE: This step may not be necessary if the security screw is already loosened. CAUTION: You must rotate antenna brackets up to remove front panel. NOTE: Tightening the security screw is optional. Laser Compliance This device is classified as a Class 2 Laser Product in accordance with US FDA regulations and the IEC 60825-1. Each laser product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No.