HP Trusted Platform Module - Installation Guide

1
1
2
4
3
5
Go to www.hp.com/support and download the latest firmware version
for your printer. Update the firmware on your printer. Refer to the printer
documentation for instructions. After the latest firmware is installed
successfully, go to Step 2.
Turn the printer off, and then unplug the power cord and network cables.
Remove the formatter from the printer, or locate the formatter and
remove the access cover. The formatter location, appearance, access
covers, and removal procedures might vary depending on printer.
If needed, refer to the product support page for your printer at
www.hp.com/support for help.
If the optional hard-disk drive (HDD) is installed (as shown above), remove
it. If the HDD is not installed, skip this step. If needed, refer to the product
support page for your product at www.hp.com/support for HDD removal
instructions.
F5S62A
www.hp.com/support/Trusted_Platform_Module_Accessory
Lea esto primero
HP TPM User Guide with warranty information

Summary of content (4 pages)