- Hewlett-Packard Printer User's Guide

Using the Scan Functions

8-24 C350

The URL notification mail destination is an e-mail address registered to a

one-touch key or temporary registration key. It is specified using the

parameters below during one-touch key registration or temporary

registration. For the setup procedure, refer to “Registering Destinations in

Advance” on page 8-25.

G Scan to E-mail: Address (To:)

G Scan to FTP Server: URL Notification E-mail Address

G Scan to HDD: URL Notification E-mail Address

Setting the mail destination from this machine’s control panel

When using Scan to FTP Server or Scan to HDD, the URL information is

sent to the address registered for “URL Notification E-mail Address” in the

specified one-touch key or temporary registration key. However, you can

specify a mail destination separately from this machine’s control panel.

Setup procedure

1 On this machine’s control panel, press the [Scan] key.

2 On the Address screen, select the destination for which the

transmission method is set to Scan to FTP Server or Scan to HDD.

3 Touch [E-mail Notification] on the MISC. screen.

4 Select the desired index (index number or [Temp. Registration]), and

then touch the key for the desired notification address.

✎

Note

The URL notification destination must be registered to the one-touch

key.

Only one-touch keys that have e-mail addresses registered can be

used to specify the destination.