- Hewlett-Packard Printer User's Guide

8
Using the Scan Functions
8-34 C350
3 On the “Network” tab, click Common Setting, and then click LDAP in
the sub-menu that appeared.
4 Specify settings for the following.
LDAP Set whether to use the LDAP search function. Select “Enable”
here.
LDAP Server Address Enter the IP address or server name (host name) to set the
LDAP server address (alphanumeric characters, the first
character cannot be a number for the server name).
SSL/TLS Set whether to perform communications with the LDAP server
using SSL/TLS.
Port Number Set the port number used to communicate with the LDAP
server.
Search Root Set the search start point of the LDAP search.
Settings: Up to 255 characters
Connection timeout Set the connection timeout for the LDAP server.
Settings: 5 to 300 (seconds)
Max. No. of E-mail
Searches
Set the search upper limit of the LDAP search.
Settings: 5 to 120