- Hewlett-Packard Printer User's Guide

Using the Scan Functions

C350 8-35

Using this machine’s control panel

A portion of the LDAP parameters can be entered from this machine’s

control panel.

1 On this machine’s control panel, press the [Utility] key, touch [Admin.

Mode], and then enter the administrator access code.

2 Touch [Network Setting], then [LDAP].

3 Specify settings for the “LDAP Server Address”, “SSL/TLS”, “Port

Number”, and “Search Base” parameters on the Network Setting

screen. Specify settings for the “Authentication System”, “Login

Name”, and “Password” parameters on the Authentication screen.

Specify settings for the “Max. Number of Searches” and “Connection

Timeout” parameters on the Others screen.

Authentication Method Set the LDAP authentication method.

If “GSS-SPNEGO” is selected, the DNS server in the TCP/IP

settings must be specified (refer to page 12-50).

Settings: “Anonymous”, “Simple”, “Digest-MD5/CRAM-MD5”,

or “GSS-SPNEGO”

Domain Name If the authentication method is set to “GSS-SPNEGO”, set the

domain name used with DNS.

Settings: Up to 64 characters

Settings: Up to 255 characters

Password Set the password used to log in to the LDAP server.

Settings: Up to 128 characters

[Check LDAP Settings]

button

Checks whether a connection can be established correctly

using the settings entered here.