- Hewlett-Packard Printer User's Guide

Using the Scan Functions
8
C350 8-41
8.7.2 Specifying Scan to E-mail Settings
Using PageScope Web Connection or this machine’s control panel, set
the mail server (SMTP server) that will be used for mail transmission.
Using PageScope Web Connection
1 Start up PageScope Web Connection.
2 Enter the administrator access code, and log in to Administrator mode.
3 On the “Network” tab, click E-mail / Internet FAX, and then click Send
in the sub-menu that appeared.
4 Specify settings for the following.
SMTP Server Set the IP address of the SMTP server.
Port Number Set the port number of the SMTP server.
(Normally, use the default value of 25.)
SMTP Connection
Timeout
Set the connection timeout for the SMTP server.
Maximum E-mail Size Set the maximum size of the transmitted mail.
Settings: “No Limitation”, 100 to 3000 KB (in units of 100 KB)
Binary Division Set whether to divide the e-mail into multiple e-mails (binary
level) when the e-mail size exceeds the maximum e-mail size.
Refer to “Binary Division and Scanned File Separation” on
page 8-43.