- Hewlett-Packard Printer User's Guide

Using the Scan Functions

C350 8-51

8.8.3 Setting the Proxy Server

When using a proxy server, you must enter settings using PageScope

Web Connection.

✎

Note

To use a proxy server, set “Use Proxy” to “Yes” when registering the

FTP server using PageScope Web Connection. (Refer to “Registering

FTP Servers” on page 8-48.)

Setup procedure

1 Start up PageScope Web Connection.

2 Enter the administrator access code, and log in to Administrator mode.

3 On the “Network” tab, click FTP Server, and then click FTP

Configuration in the sub-menu that appeared.

4 Specify settings for the following.

Proxy IP Address Enter the IP address of the proxy server when a proxy server

is used.

Port Number Set the port number of the proxy server.

(Normally, use the default value of 21.)

FTP Connection Timeout Set the connection timeout for the FTP server.

Passive Mode Set the passive mode.