- Hewlett-Packard Printer User's Guide

Using the Scan Functions

C350 8-65

8.11.1 Flow of Scan Operation

Procedure

1 Using PageScope Web Connection, specify the e-mail settings, and

enter the subject and text of the e-mail.

☞ “Setting the E-mail Transmission” on page 8-66 and “Setting the E-

mail Subject and Text” on page 8-69

2 Using PageScope Web Connection, perform one-touch key

registration or temporary key registration.

(You can also enter the e-mail address directly from this machine’s

control panel in step 3.)

☞ “Registering Destinations in Advance” on page 8-25

3 Using this machine’s control panel, specify the destination of the

scanned data.

☞ “Setting the Destination” on page 8-70

4 Using this machine’s control panel, set the scan mode and document

designation.

☞ “Scan Mode Screen” on page 8-14 and “Original Setting Screen” on

page 8-16

5 Set the document, and then press the [Start] key on this machine’s

control panel.

The document is scanned. The scanned data is sent using Internet

fax.

✎

Memo

If the e-mail settings, the setting of the subject and text of the e-mail,

and the registration of the destination are already done, perform steps

3 through 5.