- Hewlett-Packard Printer User's Guide

10
Using the Box Functions
10-16 C350
10.10 Performing Forward to PC Operations
The image data in the box on the hard disk of this machine is forwarded
to a computer using FTP.
✎
Note
An FTP server application must be installed on the computer and the
application must be running when the image data is being received.
10.10.1Flow of Forwarding Operation
Procedure
1 Using PageScope Web Connection, perform one-touch key
registration or temporary key registration.
☞ “Registering Destinations in Advance” on page 8-25
2 Set the FTP application.
☞ “Setting the FTP Application” on page 8-54
3 Start up the FTP application on the computer.
4 Using this machine’s control panel, select the files to be forwarded.
☞ “Selecting the File to be Forwarded” on page 10-4
5 Using this machine’s control panel, specify the forward destination of
the image data.
☞ “Specifying the Forward Destination” on page 10-5
6 On this machine’s control panel, press the [Start] key.
The image data in the box is forwarded to the application that receives
the data using FTP.
7 Check the image data on the recipient computer.
✎
Memo
If the registration of the destination and the FTP application
configuration are already done, perform steps 3 through 7.
The forward destination to the computer is the root folder specified by
the application. The destination cannot be specified from this machine.