- Hewlett-Packard Printer User's Guide

12
Using PageScope Web Connection
12-6 C350
4 Log into Administrator mode of PageScope Web Connection again.
5 Access the menu that you tried to access in step 2.
Since the cache function is activated, the timeout screen appears again.
Clicking [OK] here causes the screen to enter User mode, but this
machine’s control panel is locked. In addition, you cannot log into
Administrator mode of PageScope Web Connection.
If this occurs, you can correct the problem by carrying out any of the
procedures below.
G Wait until the actual timeout time elapses.
G Restart this machine (turn it off and back on).
To prevent this problem from occurring, disable the cache function of the
Web browser by carrying out the procedure above or delete the temporary
files by carrying out the procedure below.
Deleting temporary files
You can avoid the problem by deleting temporary files using the
procedure below after step 3 (before logging into Administrator mode of
PageScope Web Connection again).
✎
Note
The menus and commands may vary depending on the Web browser
version, in which case refer to the help for the Web browser.
On Internet Explorer
1 From the “Tools” menu, choose “Internet Options”.
2 In the “General” tab, click [Delete Files] under “Temporary Internet
files”.
3 Click the [OK] button.
On Netscape
1 From the “Edit” menu, choose “Preferences”.
2 In the “Category” box, choose “Advanced” and then “Cache”.
3 Click the [Clear Cache] button.