- Hewlett-Packard Printer User's Guide

Installing the Printer Driver

C350 4-7

4.2 When This Machine and the Computer are

Connected Using a Parallel Connection

✎

Note

To connect this machine to a computer using a parallel connection, the

optional local interface kit is required.

4.2.1 Installing the Printer Driver Using Plug and Play

For Windows NT 4.0, Plug and Play cannot be used to install the printer

driver. Refer to the procedure for installing the printer driver using the Add

Printer Wizard. If you are using Windows NT 4.0, exit the Add Printer

Wizard started by Plug and Play, click the “Add Printer” icon, and then

install the printer driver (refer to “Installing the Printer Driver Using the Add

Printer Wizard” on page 4-11).

For Windows 98

1 After using a parallel cable to connect this machine to the computer,

turn on the computer.

✎

Note

Do not disconnect and connect the cable while the computer is

starting up.

2 Insert the CD-ROM into the computer’s CD-ROM drive.

3 Turn this machine on.

The Add New Hardware Wizard dialog box appears.

4 Click the [Next] button.

5 Select Search for the best driver for your device (Recommended),

and then click the [Next] button.

6 Select Specify a location, and then click the [Browse] button.

7 Specify the directory on the CD-ROM

(\Driver\English\Printer\Win9xME) that contains the printer driver for

Windows 98, and then click the [OK] button.