- Hewlett-Packard Printer User's Guide

13
Using the BOX Utility
13-4 C350
13.5 Registering the Copier
To retrieve image data on the copier hard disk, the copier must be
registered in the utility program. Up to 10 copiers can be registered.
Registration procedure
1 Click the [Start] button, and then click “Programs” – “KONICA
MINOLTA” – “BOX Utility” – “BOX Utility” to start up the BOX Utility.
2 On the “Setup” menu, click “Register MFP Controller”.
The setup dialog box below appears.
3 Click the [New Registration] button.
4 Enter the registration name in the Name box (up to 16 characters) and
the IP address of the copier in the Host box.
✎
Memo
The following symbols cannot be used in the box name.
\ / : * ? " < > |
For the procedure to set the IP address of this machine, refer to
“Setting the IP Address for This Machine” on page 6-2.
5 Press the computer keyboard’s [Enter] key and click the [OK] button.
The registration is saved.