- Hewlett-Packard Printer User's Guide

13
Using the BOX Utility
13-18 C350
2 If multiple copiers are registered, select the copier to be connected
from the Connect drop-down list.
The Connect drop-down list displays the registration names that were
entered in “Registering the Copier” on page 13-4.
3 Enter the administrator password for the copier in the Password box.
4 In the Restore Folder box, specify the computer folder where the
backup file is stored.
You can also specify the folder by clicking the [Browse] button.
5 Click the [Start] button.
The restore operation starts.
When the restore operation is complete, a message appears.
✎
Note
If image data files with same file names exist on the copier, the files
are overwritten during the restore operation.
The date/time of creation of image data files that have been restored
are set to the date/time when the restore operation was performed.
You cannot execute the restore operation when another user is
connected to the copier using the BOX Utility or when there are copy
jobs, print jobs, or scan jobs on the copier.
After executing the restore operation, the password for the box is reset
to the box name. If the box name is less than four digits, add 0s after
the box name to create four digits.
(Example: If the box name is “U1”, the password is “U100”.)