- Hewlett-Packard Printer User's Guide

Setting Up the Printer Driver

5-16 C350

5.9 Hole Punching Documents

✎

Note

The hole punch function is available only when optional finisher FS-

601 is installed on this machine.

Setting procedure

1 Click the “Setup” tab.

2 Click the [Detail of Output Setting] button to display the detailed

settings dialog box.

3 From the Punch and Punch Holes drop-down lists, select one of the

following settings.

❍ Punch: “OFF”, “Top Side Punch”, “Left Side Punch”, or “Auto

Punch”

❍ Punch Holes: “2”, “3”, or “4”

✎

Note

When using the hole punch function, always select “2” or “3” from the

Punch Holes drop-down list.

No holes will be punched if “4” is selected.