- Hewlett-Packard Printer User's Guide

Network Printing in a Windows Environment

6-2 C350

6.2 Setting the IP Address for This Machine

First, use this machine’s control panel to assign an IP address to this

machine.

✎

Note

When specifying network settings, follow the instructions of the

network administrator.

Setting procedure

1 Press the [Utility] key on this machine’s control panel, touch [Admin.

Mode], and then enter the administrator access code.

2 Touch [Network Setting], [Common Setting], then [TCP/IP].

3 Specify settings for the following.

❍ IP Address: Set the IP address of this machine.

❍ Subnet Mask: Set the subnet mask for the network to which

you are connecting.

❍ Gateway Address:

Set the default gateway address for the

network to which you are connecting.

✎

Note

Although the IP address is entered without using the DHCP server

in the procedure described here, it is also possible to automatically

assign the IP address from the DHCP server. When “DHCP” is set

to “Enable”, the IP address, subnet mask, and gateway address

settings are automatically assigned from the DHCP server on the

network, so it is not necessary to assign them manually. However,

note the following when setting “DHCP” to “Enable”.