- Hewlett-Packard Printer User's Guide

Using the Scan Functions
8
C350 8-1
8 Using the Scan Functions
This chapter describes the setup and operating procedures of the scan
functions.
This machine’s control panel or PageScope Web Connection is used to
set up the scan functions. For details on the startup procedure of
PageScope Web Connection and the procedure for logging in to
Administrator mode, refer to “12 Using PageScope Web Connection”.
8.1 Overview
The following types of scan functions are available on this machine. Use
the appropriate type that matches your network environment and
application.
Scan to E-mail Sends scanned data as an attachment to an e-mail.
Refer to “Scan to E-mail” on page 8-5 and
“Performing Scan to E-Mail Operations” on page 8-40.
Scan to FTP Server Sends scanned data to an FTP server.
Refer to “Scan to FTP Server” on page 8-6 and
“Performing Scan to FTP Server Operations” on page 8-46.
Scan to PC Sends scanned data to a computer using FTP.
Refer to “Scan to PC” on page 8-7 and
“Performing Scan to PC Operations” on page 8-53.
Scan to HDD Sends scanned data to the optional hard disk.
Refer to “Scan to HDD” on page 8-8 and
“Performing Scan to HDD Operations” on page 8-55.
Internet FAX Attaches the scanned data to an e-mail and sends it to a device
that supports Internet faxing. In addition, received image data can
be printed.
Refer to “Scan to Internet FAX” on page 8-9,
“Internet FAX Reception” on page 8-10,
“Performing Scan to Internet FAX Operations” on page 8-64, and
“Performing Internet FAX Reception Operations” on page 8-72.