F10 Setup overview for 2012 HP Business Notebooks and Desktops 2012 Business PC Models Technical white paper
9 
Feature 
Function 
Default Setting, 
if applicable 
 Integrated Camera 
Enables integrated camera 
Enabled 
 Power Monitor Circuit 
Enables power monitor circuit 
Enabled 
 Audio Device 
Enables integrated audio device 
Enabled 
 Modem Device 
Enables integrated modem 
Enabled 
 Microphone 
Enables integrated microphone 
Enabled 
 Speakers and Headphones 
Enables internal speakers and headphone jack 
Enabled 
 Wake unit from sleep when lid is 
opened 
Opening the lid wakes the computer from Sleep mode 
Disabled 
 Power on unit when lid is opened 
Opening the lid powers on the computer 
Disabled 
 mSATA 
Enables mSATA support 
Enabled 
 Boost Converter 
Draws power from the battery to give the CPU a momentary 
performance gain. 
Enabled 
 Backlit keyboard timeout 
Allows you to specify the timeout period for the keyboard 
backlit LEDs 
15 secs 
Port Options 
 Serial Port 
Enables integrated serial port 
Enabled 
 Parallel Port 
Enables integrated parallel port 
Enabled 
 Flash media reader 
Enables integrated media card reader 
Enabled 
 USB Port 
Enables integrated USB port 
Enabled 
 1394 Port 
Enables integrated 1394 port 
Enabled 
 Express Card Slot 
Enables integrated ExpressCard slot 
Enabled 
 Smart Card 
Enables integrated smart card slot 
Enabled 
 eSATA Port 
Enables integrated eSATA port 
Enabled 
AMT Options 
 USB Key Provisioning Support 
Allows AMT provisioning using USB Disk-on-key 
Disabled 
 Unconfigure AMT on next boot 
Resets AMT configuration options on next boot 
Disabled 
 SOL Terminal Emulation Mode 
Specifies terminal emulation mode 
ANSI 
 Firmware Progress Event Support 
Enables AMT progress events, which allows remote 
monitoring of machine status of client units 
Disabled 
 Initiate Intel CIRA 
Enables Intel CIRA feature 
Disabled 
Set Security Level 
Allows administrator to restrict visibility or configurability of 
F10 Setup options for standard users 
N/A 
Restore Security Defaults 
Restores the security level of F10 Setup options to default 
N/A 
BIOS Power-On 
Automatically powers system on based on preset schedule. 
 Shuts down Windows gracefully and ensures feature is on in 
F10 Setup 
 Enables from Windows 7 and Vista "Allow wake timers”; 
Power Options -> Advanced settings -> Sleep -> Allow Wake 
timers - Plugged in: Enable 
 Supported ONLY on AC power 
Disabled 










