HP LaserJet 8150 Printer Series - Getting Started Guide

20 Printer Setup
EN
Step 9 Attach Power Cord
1 Locate the power switch on the front
of the printer. Make sure the printer
is turned off.
2 Connect the power cord to the
printer and a grounded power strip
or an AC outlet.
3 Turn the printer on. After the printer
warms up, the READY
message
should appear on the control panel
display and the Ready light should
remain on. If the READY
message
does not appear, see the problem
solving chapter in the online user
guide.
1
2
3
READY