HP LaserJet 8150 Series Printer - Getting Started Guide

22 Printer Setup
EN
Step 11 Configure the Control Panel Display
Language (Optional)
Use the printer control panel to set the
printer to display printer messages and
print configuration pages in the language
of your choice.
1 When you turn the printer on for the
first time, wait until ENTER LANGUAGE
= ENGLISH appears. To change the
display language go to step 2, or to
choose English go to step 4.
2 If ENTER LANGUAGE = ENGLISH did
not appear, press and hold S
ELECT
while simultaneously pushing the
power switch ON. Hold S
ELECT
until
SELECT LANGUAGE appears, then
release S
ELECT
. Go to step 3.
Note
Only -V
ALUE
+, S
ELECT
, and G
O
are
active while the display language is
being configured. All other keys are
ignored.
If you press Go without selecting a
language, the printer will bring itself
online and all subsequent messages will
be displayed in English. However, since
no display language was selected, the
ENTER LANGUAGE = ENGLISH message
will reappear (after the power-on self
test) every time the printer is turned on
until you select a language.
3 When ENTER LANGUAGE=ENGLISH
displays, press - V
ALUE
+ repeatedly
until the desired setting appears.
Continued on next page.
1
2
3
ENTER LANGUAGE
=ENGLISH
ENTER LANGUAGE
=ENGLISH