HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Chapter 2 Printing Tasks 114
Using the Stapler
4 Remove the plastic shipping clip from the
new staple cartridge. Insert the new staple
cartridge so that it snaps into place.
5 Close the stapler unit cover, replace the
Face-up Bin, and turn the printer on.
Note
If the printer runs completely out of staples or a
staple jam requires that you remove all the
staples in the path, up to six copies may not be
stapled.
Stapling Documents (5-bin Mailbox with Stapler)
The stapler can staple documents of 2 to a maximum of 20 pages on 16 to
28 lb paper, Letter, and A4 size only. The stapler should not be set as the
default output bin. If your job to be stapled is only one sheet or if it is greater
than 20 sheets, the printer will print your job to the bin, but it will not be
stapled. For example, if your print job is 30 sheets, after 21 sheets are printed,
these 21 sheets will be sent to the stapler bin (unstapled). The other 9 will be
printed and delivered to the stapler bin (unstapled). The stapler bin can hold
up to 350 stapled sheets. To have your job stapled, send it to OPTIONAL BIN x.
See pages 109
and 110 to choose the appropriate bin according to the mode
you are using.
4
5