HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Chapter 2 Printing Tasks 118
Printing Both Sides of Paper (Optional Duplex Printing Accessory)
Guidelines for Printing Both Sides of Paper
CAUTION Do not print on both sides of labels, transparencies, envelopes, custom
paper, or paper heavier than 28 lb (105 g/m
2
). Damage to the printer and
paper jamming might result.
! You might need to configure the printer driver to recognize the duplexer.
(See the printer software help for details.)
! To print on both sides of paper, make the selection from the software or
printer driver. (See the printer software help.)
! If the printer driver does not have this option, change the Duplex setting
from the Paper Handling Menu in the printer’s control panel to DUPLEX=ON.
Also in the Paper Handling Menu, set Binding to long edge or short edge.
(For more information, see page 121
.)
Note If a Custom Paper Tray is installed, you cannot duplex standard paper
sizes from Tray 1.