HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Chapter 3 Advanced Printing Tasks 158
Printing by Type and Size of Paper
2 From the Paper Handling Menu in the printer’s control panel, select the
paper type for each tray. If you are unsure what type you are loading (such
as bond or recycled), check the label on the package of paper. For
supported types, see page 397
.
3 Select the paper size settings from the control panel.
" Tray 1: If the printer has been set to TRAY 1 MODE=CASSETTE from the
Paper Handling Menu, also set the paper size from the Paper Handling
Menu. If custom paper is loaded, set the size of custom paper from the
Printing Menu to match the paper loaded in Tray 1. To print custom-size
paper, see page 139
.
" Other trays: Paper size settings are adjusted when paper is properly
loaded into the printer. (See the sections on loading paper, starting on
page 89
.)
4 From the software or printer driver, select the desired type and size of
paper.
Continued on next page.