HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Chapter 3 Advanced Printing Tasks 175
Job Retention
Deleting a Private Job
When a user sends a private job, the printer overwrites any previous jobs with
the same name. A private job is automatically deleted from the printer’s hard
disk or memory after the user releases it for printing.
Note If you turn the printer off and then back on, all quick copy, proof and hold,
and private jobs are deleted.
A private job can also be deleted from the printer’s control panel before it is
ever printed.
1 Press M
ENU
repeatedly until PRIVATE/STORED JOBS MENU appears.
2 Press I
TEM
until your user name appears.
3 Press - V
ALUE
+ until the desired job name appears.
4 Press S
ELECT
to select the job. PIN:0000 appears.
5 Press - V
ALUE
+ to change the first number of the PIN, and then press
S
ELECT
. An * appears in place of the number. Repeat these steps to
change the remaining three numbers of the PIN. COPIES=x appears.
Continued on next page.