HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Chapter 4 Printer Maintenance 190
Printer Maintenance Kit
Printer Maintenance Kit
Note The Printer Maintenance Kit is a consumable and is not covered under
warranty.
To ensure optimum print quality, the printer will prompt you to perform printer
maintenance every 350,000 pages. When the PERFORM PRINTER MAINTENANCE
message appears on the control panel, you will need to purchase a Printer
Maintenance Kit and install the new parts. Then remove the message by
turning the service message off in the Configuration Menu. To reset the pages,
turn the printer off, hold down the I
TEM
- and the V
ALUE
- keys while turning the
printer on. Wait for RESET MAINT/COUNT to display on the control panel before
releasing the keys.
For ordering information, see page 42
. For more information on installing the
Printer Maintenance Kit, see the instructions that come with it.
HP Policy on Non-HP Printer Maintenance Kits
Hewlett-Packard Company cannot recommend use of non-HP printer
maintenance kits, either new or remanufactured. Because they are not
HP products, HP cannot influence their design or control their quality.
For more information on the printer maintenance kit, see the instructions that
come with it.