HP LaserJet 8150 Series Printer - User Guide
Table Of Contents
- HP Customer Care
- Contents
- Introduction
- Printer Basics
- Printing Tasks
- Advanced Printing Tasks
- Overview
- Using Features in the Printer Driver
- Different First Page
- Blank Back Page
- Customizing Tray 1 Operation
- Printing by Type and Size of Paper
- Changing the Variable Fuser Mode
- Loading Custom-size Paper
- Job Retention
- Printing with the Optional HP Fast InfraRed Connect
- Edge-to-Edge Printing
- Duplex Registration
- Printer Maintenance
- Problem Solving
- Overview
- Clearing Paper Jams
- Clearing Jams from the Input Tray Areas
- Clearing Jams from the Optional Duplex Printing Accessory
- Clearing Jams from the Top Cover Area
- Clearing Jams from the Output Areas
- Clearing Jams from an Optional HP Output Device
- Clearing Jams from the Stapler (5-bin Mailbox with Stapler)
- Solving Repeated Paper Jams
- Understanding Printer Messages
- Correcting Output Quality Problems
- Checking the Printer’s Configuration
- HP Digital Copy
- Overview
- HP Digital Copy Installation
- HP Digital Copy Operating Instructions
- HP Digital Copy Features and Benefits
- HP Digital Copy Control Panel
- HP Digital Copy Settings
- Loading documents into the Automatic Document Feeder
- Loading documents onto the Flatbed
- Loading documents larger than the Document Board
- Reading a page from a thick book
- Foreign Interface Harness
- Paper Specifications
- Document Quality
- HP Digital Copy Maintenance
- HP Digital Copy Problem Solving
- Service and Support
- Specifications
- Control Panel Menus
- Printer Memory and Expansion
- Printer Commands
- Regulatory Information
- Index
Chapter 4 Printer Maintenance 199
Cleaning the Printer
Using the Printer Cleaning Page
If toner specks appear on the front or back side of your print jobs, follow the
procedure below.
From the printer’s control panel, do the following:
1 Press M
ENU
repeatedly until PRINT QUALITY MENU appears.
2 Press I
TEM
repeatedly until CREATE CLEANING PAGE appears.
3 Press S
ELECT
to create the cleaning page.
4 Follow the instructions on the cleaning page to complete the cleaning
process.
Note In order for the cleaning page to work properly, print the page on copier
grade paper (not bond or rough paper).
When toner has been cleaned from inside the printer, shiny black spots will
appear on the page’s black strip. If white spots appear on the black strip, print
another cleaning page.
To ensure good print quality with certain types of paper, use the cleaning page
every time the toner cartridge is replaced. If the cleaning page is frequently
needed, try a different type of paper.